Instax Mini 11 Film Not Coming Out (5 Issues Fixed)
The Instax mini 11 camera is one of the go-to instant cameras for many. It is very easy to use and has a stylish design. However, at times, you may notice that the film does not come out whenever you take a photo.
The film on your mini 11 not coming out is primarily due to low battery. Usually, most of the power from the batteries is used to eject the film. Hence, there may be enough power to take a photo, but not enough to eject the film. Other reasons include a damaged film, malfunctioning film roller, the film is incorrectly loaded, or the film slot is blocked.
Below we discuss these causes in detail and give some solutions so that you know what to do in case it happens.
Instax Mini 11 Film Not Coming Out: Common Causes and Possible Solutions
The Instax mini 11 camera is very user-friendly. It is in fact one of the easiest cameras to operate, with only two control buttons and an auto exposure feature. So, there is not a lot that could possibly go wrong with this camera. However, it may happen that the film fails to come out. This is one of the common problems with this camera, but not to worry, it can be easily fixed.
Low battery power
The main culprit for this issue is the low battery. With the Instax mini 11 cameras, it is important to note that most of the power goes to ejecting the film. Therefore, with low battery power, there may be some difficulty ejecting the film.
Still, you may be able to capture an image, but the film may not come out. This can easily be solved by replacing the batteries (this should be done with the camera turned on).
Blocked film slot
Also, if you notice that your film is not coming out, it could be that the film ejection slot is blocked. Check for this on the back cover. If that is the case, you are to replace the cartridge with a new one. However, if the issue still persists, check for issues with the photo ejection slot.
Damaged film
The film is not likely to properly eject if it happens to be damaged. It could easily get stuck at the film ejection slot. Hence, you are advised to avoid any bending, direct sunlight, or putting excessive pressure on the film as it develops.
Malfunctioning film roller
The Instax mini 11 comes with a mechanical roller that facilitates the ejection of the film. If this film is malfunctioning by any chance, then you will experience difficulty ejecting the film. To troubleshoot this issue, remove the film, and release the shutter to check if the roller is in good working order.
The film is incorrectly loaded
Another thing is that there is a right way to load the film onto the camera. One of the ways you can tell whether you have done so is if the yellow mark on the film aligns with that on the film compartment. If this film cartridge is not properly inserted, then the camera is bound not to function properly.
Therefore, you are required to check the film holder and ensure that the film is loaded correctly. Moreover, ensure that you use the right film for this camera—the Instax mini film. Other types are not compatible and are not likely to fit into the compartment.
FAQs
Why is there a flashing orange light on my Instax mini camera?
Usually, a flashing orange light on your Instax mini 11 camera could mean one of two things. One is that the flash is charging, which the light should become steady once the flash is fully charged. The other is that the film is jammed. If this light persists, you are to reset your device or change the batteries.
What are some common mistakes to avoid when handling the Instax mini 11 cameras?
There are some mistakes that you can make with this camera despite its easy learning curve. For one, wrong battery orientation could cause the camera not to work. Also, avoid touching the lens while taking a photo as this can cause the charging lamp to go off, which means you will not be able to take a photo. Moreover, do not open up the film compartment until it is indicated on the film counter that the film is used up. Even the slightest exposure to the film could cause damage.
Conclusion
The film not coming out is a common problem you are likely to encounter on your Instax mini 11 camera. Hopefully, with this guide, you can diagnose the problem and fix it. With that, you can get back to taking your photos.
You Can Also Read:
- Instax Mini 11 Orange Light Flashing
- Instax Mini 11 Photos Coming Out White
- Instax Mini 9 All Lights Flashing Orange
- Why Is My Instax Mini 11 Blinking Orange
- Instax Mini 11 Not Working With New Batteries
- Canon R5 Mark ii (Release Date, Price & Specs) - December 20, 2023
- Sony 100 400 vs 200 600: Which Telephoto Lens is Right? - December 15, 2023
- Sony A1 II Camera (Release Date, Price & Specs) - November 30, 2023
